Dealer operations

How Tyre Dealers Should Store TBR and PCR Tyres in Pakistan’s Climate

Good warehouse practice protects saleable condition before a tyre reaches the road. For tyre dealers in Pakistan, the priorities are a cool, dry and ventilated space, protection from sunlight and ozone, clean handling, sensible positioning and a stock record that supports inspection and rotation.

Organized Pakistan warehouse storing TBR and PCR tyres away from sunlight and moisture
Illustrative image. It does not show a MYCO facility, employee or government site.

Control the storage environment

Continental’s commercial tyre technical guidance calls for tyres to be stored in dry, cool, moderately ventilated rooms protected from direct sunlight. It also warns against ozone-producing equipment, fuels, lubricants, chemicals and sharp or hot objects. Michelin similarly recommends a clean, ventilated and dry location, away from weather, heat and substances that can alter rubber.

These controls matter in Pakistan because direct sun on a loading area, heat trapped under a metal roof, monsoon moisture and workshop contaminants can exist within the same premises. A warehouse does not need to be refrigerated, but it should prevent concentrated heat, standing water and prolonged ultraviolet exposure. Use blinds or opaque protection where sunlight reaches stored tyres, and address roof leaks before stock is placed below them.

Separate tyres from damaging sources

  • Keep tyres away from motors, transformers, welding equipment and other possible ozone sources.
  • Do not store them beside fuel, oil, solvents, acids, disinfectants or unidentified workshop chemicals.
  • Keep the floor and racks clean, with no sharp edges that can mark beads or sidewalls.
  • Use appropriate handling equipment and avoid dropping, dragging or lifting tyres by a way that damages the bead.
  • Maintain clear aisles so staff can inspect and rotate stock safely.

Position TBR and PCR stock correctly

Storage method depends on whether a tyre is mounted, its size and the rack system. Follow the tyre maker’s instructions and the rack manufacturer’s load limits. Avoid distortion from poor support or excessive stacking. Large TBR tyres need equipment and spacing suitable for their weight; PCR stock needs organised bays that keep sizes and patterns identifiable without unsafe piles.

Continental advises that tyres stored for extended periods should be rotated or repositioned to reduce distortion, and that stock should be used in the order received. A first-in, first-out process is therefore a useful control, supported by receipt date, batch or date-code records and regular visual checks. FIFO does not replace inspection: any tyre with unusual deformation, contamination or damage should be set aside for competent assessment.

A monthly dealer warehouse walk

AreaQuestionAction
Roof and wallsAny leaks, direct sun or unusual heat?Move stock and correct the source
Racks and floorClean, stable and free of sharp edges?Isolate unsafe bays
Nearby equipmentMotors, welders or chemicals close by?Restore safe separation
Stock conditionDistortion, dirt, moisture or damage?Reposition or quarantine for inspection
Rotation recordsOldest suitable stock presented first?Correct bay labels and pick order

Receiving and dispatch controls

Storage quality begins at receipt. Compare the delivery with the purchase record, inspect packaging and visible condition, and place tyres in the correct bay without leaving them in an exposed yard. Record the receipt date and the identifying information your business uses for traceability. If a tyre is wet or contaminated, do not hide it inside a stack; isolate it and follow the supplier or manufacturer’s handling advice.

At dispatch, check that the selected size, pattern and quantity match the order and that handling has not damaged the bead or sidewall. Clean, legible bay labels reduce picking errors, but labels should sit on racks rather than adhesive being applied to critical tyre surfaces. These simple hand-offs connect warehouse protection with accurate dealer service.

Browse MYCO’s brands

Dealers comparing a wholesale tyre distributor in Pakistan can browse MYCO’s prototype ranges for Hifly, Tercelo, Fortune, Longmarch and Roadlux. Use the TBR range for commercial truck and bus patterns, or the PCR range for passenger tyres wholesale enquiries.

When asking about truck tyres in Karachi or passenger stock for another city, send brand or acceptable alternatives, size, quantity, required date and delivery location. The prototype data is a planning aid; the sales desk must confirm current availability and specification before order.

Catalogue starting points

Relevant MYCO tyre options

These are examples from the prototype catalogue. Product data is marked Sample; contact MYCO to confirm current stock, specification and suitability.

Questions buyers ask

Frequently asked questions

Can tyres be stored in direct sunlight?

No. Store tyres indoors and protect them from direct sunlight, weather and concentrated heat, following manufacturer guidance.

Should a dealer use first-in, first-out rotation?

Yes. Receipt-date records and FIFO picking support orderly stock rotation, alongside condition inspections.

Can tyres be stored near workshop motors or chemicals?

Keep them away from ozone-producing equipment and from fuel, oil, solvents and other chemicals that may affect rubber.

References

  1. Continental — Commercial Vehicle Tyres Technical Data Book, storage guidance
  2. Michelin — Tyre usage and storage tips

Technical and regulatory information should be checked again before operational or legal decisions.

Continue reading

Related publications

Discuss your tyre requirement

Tell MYCO what the vehicle carries, where it runs and which axle needs a tyre.